The Moneta Dress

Having my daughter home for the summer gives me an excuse to try some fun projects that are more suited to the younger crowd. For Fresh Make #13, I decided to make Hanna a Moneta which is an indie design by Colette Patterns that is wildly popular with the online sewing community. DSC_0354 DSC_0348 DSC_0346 The Moneta is available online as printed paper pattern for $18, or as a PDF for $14. I splurged for the printed pattern plus an additional $5.50 for shipping because I’m not fond of PDFs, and I was curious to see the hip graphic design and packaging. Now, $23.50 is a lot for me to spend on pattern, but I felt I needed to try an indie pattern to keep up with the online community. I have to say, the dress is adorable and a smartly designed pattern. I will save my knit picky comments to the end of my post.
cp1028-moneta-cover-med-37a80b85ae73088a6d790a6771162577 The fabric I chose is from the online store, Girl Charlee. I have to be honest that I hesitantly ordered from them as I have been disappointed in their fabrics more than once. I was swayed by the claim that the fabric was made in Los Angeles, and I like to buy American made if possible. Unfortunately, this fabric was no improvement over my past purchases. Basically there is very litte stretch in this single knit jersey and the design is printed significantly off grain. Previously I thought it wouldn’t be cool to bad mouth a resource, but I recently read a post in another blog in which the author chose to be honest about her disappointment in Girl Charlee, and then several readers commented that they felt the same way about the site’s products. Shouldn’t we be truthful in a blog?

The bodice calls for lining. I always like to find something in my stash for linings and such. I used a recycled t-shirt. I also used a hand-dyed recycled t-shirt for the constrasting collar fabric.

The back neckline is slightly lower than the front. Cool design detail, huh?

The back neckline is slightly lower than the front. Cool design detail, huh?

The collar is cleverly sewn with the seam on the outside, but remains hidden when the collar folds over.

The collar is cleverly sewn with the seam on the outside, but remains hidden when the collar folds over.

The bodice is fully lined, and the instructions provide a technique that was new to me for completely machine finishing the armholes.
DSC_0364 The skirt waist was “shirred” (gathered) with an new version of an old technique of stretching the elastic evenly around the opening and sewing it directly on the fabric. I have done this countless times for elastic waistbands on knits, but never for the purpose of gathering a skirt which attaches to a bodice.

The skirt is shirred with clear, lightweight elastic. This techique enables the waist stretch when pulling the dress on and off.

The skirt, shirred with elastic, enables the waist stretch when pulling the dress on and off.

DSC_0353

LET’S BE HONEST:
1. This pattern is a hip, modern and fresh design for knits. I now understand why everyone loves their Monetas.

2. Although Hanna’s measurements more closely corresponded to a SMALL, and the pattern provided an explanation about “negative ease” with knits, I cut a MEDIUM because the fabric had little stretch and the recycled t-shirt I used for the lining was of a thicker fabric. It fit her perfectly for the type of fabric used. I could see though, that if it was made with a stretchy fabric like a rib knit, a smaller size would be appropriate.

3. Please allow me to go on record as staying that I don’t think it necessary or a good technique to serge your 2 collar pieces when it is being flipped right-side out and the bulky serged seam will lie around the inside edge of the collar. This was done on a sewalong I followed, and I’ve seen it done other places online. With knits, even if they curl a bit, I still grade the seam allowances for a smooth outside finish when I am encasing them. A gentle pressing with the iron does wonders too for a nice quality finish.

4. Thoughts on instructions: I know the instructions on the big four pattern companies are ugly and hard to follow. Nobody likes to read them. The Moneta pattern comes with a thread-bound 32 page instruction booklet with simple illustrations on uncluttered, spacious layouts. While I was captured by the novelty of the instructions being visually different, when I really dove into them taking the perceptive of someone with little background experience/knowledge, they were just as hard to follow as traditional patterns instructions. I am not knocking people who write sewing instructions for any company. I know it must be hard; I wouldn’t want to do it. These instructions also contain some shaded boxes that direct you to websites with videos that contain further instruction details on some of the main techniques. This is a good thing, but I’m going to say that I’m glad that I could rely my own knowledge rather than go watch a video.

To conclude, Hanna did not pick out the fabric and did not ask me to this make this dress. I wanted to make it and I think it’s adorable, but I am not of the age or have the figure to wear it. I think she likes it; I hope she wears it. Whatever the case, it is still is joy to sew for her as I have done since she was very young.

Again, thanks for reading this post. I welcome your comments. Cheers, Lori

The Michael Shirt

My wonderful husband, Michael, is always supportive of my endeavors. He never hesitates to drop what he’s doing on a Saturday afternoon to take photos of me for my latest blog post. I thought it fitting to invite him to be a guest model for Fresh Make #12. I made Michael a stylish, modern fitting shirt. Perfect for summer. DSC_0310 DSC_0320 DSC_0321 The pattern I chose was Vogue 8759. I bought it on sale at JoAnn’s Fabrics for $4.99. (I can’t imagine that anyone would ever the $30.00 price tag printed on the envelope. As most of you probably know, Vogue patterns are always on “sale” for at least 40% off.)

I made the lower left view.

I made the lower left view.

Once again the fabric was purchased on one of my trips to my favorite DTLA fabric store, Michael Levine. I bought 1 5/8 yards at 60″ wide and $6 per yard.

Michael is standing next to his favorite fig tree.

Michael is standing next to his favorite fig tree.

DSC_0325DSC_0335DSC_0332 To attach the yoke facing by machine at the back, I rolled the shirt up inbetween the two yoke pieces with right sides facing together and stitched along the edge. This is not shown in the instructions. Please ask me if your actually interested in trying this technique. It’s easy. DSC_0326DSC_0329 The instructions called for French seams. I cheated and just serged the edges together while trimming them to about 3/8 and then top stitching 1/4″ from the seam.

LET’S BE HONEST:
1. This pattern is labeled EASY. Which I guess is OK as long as one doesn’t assume that EASY means “beginner.” A pattern with a collar with a band is definitely not a beginner project and requires careful, slow sewing.

2. I made size 44 for Michael and it fits perfect. It is a “slimmer” fit. There is no room for shrinkage, so even though I prewashed the fabric, we’ll be our best to keep it out of the dryer. This pattern ranges from 34 to 46. I can’t imagine who would actually fit a 34 and I think there are probably a lot of men who would be sized out of this pattern.

3. I think this is a perfect men’s shirt pattern. I didn’t make any adjustments anywhere, and I did not find any odd surprises once I started construction. As is common for me, I didn’t follow the instructions exactly as I draw upon my knowledge if I see an easier way of doing something such as the machine yoke technique I mentioned above.

I thoroughly enjoy putting the attention on someone else, being the photographer instead of being the one photographed. This week, reviving a few techniques and sewing him stylish. As always, thanks for visiting my blog. I welcome your comments and would be happy provide more details on anything I’ve shown. Just ask!

Sunny Day Beach Dress

Without a doubt summer is here in Southern California for the next four months. I know I’ll want to be throwing on clothes that are cool and easy. Fresh Make #11 is one of many sleeveless dresses I’ll be making this summer. DSC_0294 DSC_0291DSC_0298 The pattern I choose was Sunny Day Beach Dress from the Sew Daily pattern store. When I received an email announcing 40% off their PDF patterns, I took a peek and this adorable dress caught my eye. I have not been particularly interested in trying a PDF pattern, but to keep myself well-rounded I decided to give this one a try. The sale price was $3.60.

Sunny Day Beach Dress by Katrin Vorbeck from Sew Daily pattern store

Sunny Day Beach Dress by Katrin Vorbeck from Sew Daily pattern store

The fabric I used is from Andover Fabric’s “Moon Flowers” collection by Jesus Cruz. I am excited to showcase this fabric as Jesus is a local artist in my community. His fabric can be found at many independent fabric stores. Because I knew exactly what I wanted, I ordered mine at Michael Levine’s online store. Michael Levine’s is much more fun to visit in person, but sometimes convenience wins over adventure.

DSC_0277

The armholes are finished with a self-made bias tape.

DSC_0284

The neck yoke is one piece with a seam in the back.

DSC_0280 DSC_0286

The hem band is faced on the inside.

The hem band is faced on the inside.

I understitched the hem facing at the bottom to keep the seam rolled to the inside.

I understitched the hem facing at the bottom to keep the seam rolled to the inside.

LET’S BE HONEST:

1. After using my first PDF pattern, I’m not a big fan. In the future, I will only purchase a PDF pattern if it is a unique design that I love and it is not available in a paper format. I have no problem with, and rather enjoy, leafing through pattern books at fabric stores (OK, maybe I’m showing my age!) Also, I do not mind waiting a few days for a purchase to come in the mail; I have plenty of other projects I can work on in the meantime. Let me state, however, that I do understand one of the purposes of a PDF – it is a cost effective way for an entrepreneurial designer/sewist to sell a pattern. I think it is awesome that the internet provides this opportunity for enterprising individuals.

2. General thoughts on written instructions: Instructions that include illustrations from the established patterns companies are difficult enough to understand. I found the instructions accompanying the Sunny Beach Day Dress hard to decipher especially because there were no illustrations accompanying the text. I know I am at an advantage when I tackle a pattern because I can draw on my 40 years of experience and figure out what I need to do. While this dress is fairly simple, I’m pretty certain that a beginning sewist would have a problem sewing this pattern independently, especially the neck yoke.

3. I made one pattern adjustment. During my first try-on, the top of the back neck yoke stuck out from the base of my neck. I narrowed it a total of 1″ at the top, grading down to the original seam at the bottom. This created a slight V-shape on the back yoke as you can see in the photos. If I were to make this again, I would probably redraw the pattern a bit to make a nice curve.

4. The instructions called for 2 single-sided self-made bias tapes sewn together, outside and inside, to finish the armholes. I decided to make 1 double-folded tape instead. (You can ask me more about this if you are interested in making this dress.) The armholes turn out a little high into the armpit. I couldn’t determine for certain if this was because I changed the method or not. Neverthless, next time, I would trim out 1/2″ before from the armholes before applying the bias tape.

I love my Sunny Day Beach Dress, and I think Jesus Cruz’s Moon Flowers is the perfect fabric for it!

Thank you for reading this post, and please, ask me questions about the construction. I would love to help you if you decide to make this dress. Best, Lori

The Breezy Blouse

I realized only one of my Fresh Makes has been a top, and I think we often overlook the idea of sewing our own tops. Also I’m still staying true to the idea of not always grabbing a plain t-shirt to throw on over jeans. For these reasons I chose to make a cute, warm weather blouse for Fresh Make #10.DSC_0250 DSC_0260
The pattern I used is Butterick 6024. Like always, I purchased this pattern on sale at JoAnn’s for $1.40 (5 patterns for $7. But you really don’t have to buy 5.). I named this top the Breezy Blouse because it seems like an easy, fun, comfortable top to wear to a picnic or other causal outdoor event that doesn’t require athletic wear.

I made view D.

I made view D.

The fabric I used is a Robert Kaufman cotton voile. It’s finely woven, lightweight and soft, like Liberty of London, but for a third of the price. I purchased it at my favorite DTLA fabric store, Michael Levine. I bought 2 yards for $11.25 per yard. DSC_0262 DSC_0268DSC_0272 The neckline is finished with a self-made bias tape. The slit is created with a facing. DSC_0265 Here’s a peek at inside. To sew the bias tape at the neckline, first I sewed one edge to the inside of the neckline. Then I folded it over the raw edges and top stitched it very close to the folded edge of the bias tape on the front side of the neckline. DSC_0275

LET’S BE HONEST:

1. This pattern once again has the very common label of “EASY.” It’s actually not a bad pattern for a beginner, except, doing bias tape on a neckline requires careful sewing for it not to look “homemade.” The front slit also requires some accurate marking to make sure it gets stitched and cut straight down the center. I would say the sleeves, however, are fairly easy for a set-in sleeve as the cap is quite straight and there is not a lot of ease that needs distributed to fit the armhole.

2. About size – I decide to make a Small (8-10) even though my bust is not 31 1/2″ – 32 1/2″ and by no stretch of my imagination is my waist 24″ – 25.” I took the “finished measurement” of the bust area that was printed on pattern piece, and wrapped a tape measurement around my bust at that same measurement. I decided I liked that amount of “wearing ease.” I was afraid I would feel like I was swimming in the next size up. If the fabric had been more drapey like a rayon, I might have preferred more wearing ease.

3. Time to contemplate hem length and body type again. I choose to cut off 5″ from the hem of the blouse to transform it from a tunic length. Don’t get me wrong, I love the tunic style and would even wear it in some cases. If the fabric was soft and drapey, I might be OK with it longer. But with this cotton and the A-line cut, it flairs out from the body and looks kind of tent-like. I definitely do not need a wide hem hitting me at the thighs. Those of you ladies with long, thin legs, go ahead a keep the tunic length! Lucky you.

Overall I love my Breezy Blouse in this cotton voile. It’s lightweight and very comfortable to wear on a hot day when you don’t feel like bearing a lot of skin.

Thank you for taking the time to read this post. And, as always, I welcome your comments.

Best, Lori

The Strolling Shorts

Currently all of my new clothing choices are influenced by the impending summer heat. I’m still standing firm to wear less jean shorts and capris. So to add variety to the warm weather skirts and dresses I’m sewing, I decided to make a fun pair of walking shorts for Fresh Make #9.
DSC_0229
The pattern I used is Burda 8087. I bought this pattern on sale at JoAnn’s for $2.49. I choose this pattern because nowadays I only only wear long shorts, and I thought the wider leg cut would be flattering on my heavier thighs figure. I named them the Strolling Shorts because I imagine that these would be perfect for a day at Disneyland, a walk down Palm Canyon Boulevard in Palm Springs or Ocean Avenue in Santa Monica.
8087-front-envelope I purchased the fabric from Michael Levine’s online store. It is from the Japanese Echino collection. I have drooled over Echino fabrics many times at Michael Levine’s downtown L.A. store. They range from $16 to $20 for their cotton/linen blends. I was alerted to a one day 20% off online sale, so I bought 2 yards of this fabric (amongst others!).
DSC_0235

I like the flap pocket detail and also how nicely the rounded waistband lays in the small of my back.

I like the flap pocket detail and also how nicely the rounded waistband lays in the small of my back.

DSC_0236 DSC_0240 I had probably not done a front fly zipper since high school when I used to make a lot of my own pants. But it came back, just like riding a bike – you never forget. I purchased the 5″ metal zipper at my favorite online zipper store, Zipit Zippers.

To secure the waistband, I used the "stitch-in-the-ditch" technique.

To complete the waistband, I used the “stitch-in-the-ditch” technique.

For the hem, I did a machine blind hem.

I did a machine blind hem.

LET’S BE HONEST:
1. Once again, this pattern is labeled “easy.” I would warn a beginner sewist not to attempt this pattern without access to help from an “in person,” experienced sewist, especially with techniques such as a front fly and waistband. I find the instructions to be a bit assumptive about a person’s knowledge and also found a few small discrepancies in the text and or illustrations that might be confusing without previous experience.

2. I’m not as big as I think. Erroring on the side of caution, I cut an 18! I did end up taking it in on the sides and back middle seam after my first fitting. I realize now that I was a little rusty at estimating my “wearing ease” for close fitting garments. 1″ at the waist and 2″ at the hips beyond your actual measurements should be fine.

3. I wanted the shorts to hit somewhere along my upper knee cap. I ended up cutting off 2″ of fabric before doing my 1 1/4″ hem.

4. Side note – I broke my boycott to not buy any “fast fashion” to have a shirt to wear in my photos. I bought the shirt on sale at Old Navy, and hemmed it up 3″. Hopefully I will find some time to make the perfect shirt to wear with my shorts.

Overall I am happy with my Strolling Shorts. I wore them to make puppets with third graders this morning! Thank you for reading my post and I welcome your comments. Lori

The Sunshine Jumper

I am keeping true to my declaration of wearing more dresses and skirts, and less jean shorts and capris for spring and summer. I’m building my collection of warm weather clothing with a versatile sleeveless dress for Fresh Make #8.
DSC_0174 The pattern I choose is Butterick 5781. I purchased it at JoAnn’s Fabrics for $1.40 as part of their 5 Butterick patterns for $7 sale. This style of dress seems to have made a bit of a comeback, and it’s been years and years since I made a dress comfy dress like this for myself. I named it the Sunshine Jumper because, while it’s a sundress, it can also be worned with a t-shirt underneath. DSC_0184 I purchased the fabric from my favorite online fabric store, Hawthorne Threads. The prints are by Lotta Jansdotter, specifically, Blomster in Coral from the Mormor collection and Ruta in White from the Sylvia collection. The fabric is quilting weight, 100% cotton, perfect for this dress. The fabric was $9.25 per yard, and I needed about 1 yard for the bodice and 2 yards for the skirt. I also lined the bodice with 1 yard of white cotton from JoAnn’s.

The dress has hidden seam pockets.

The dress has hidden seam pockets.

I’m not sure a have the perfect shoes for this dress. I think I might need to go shopping! I’m modeling it with two different types of sandals to show the versatility of the dress. DSC_0166DSC_0172

The feel and style of the dress lent itself to some double white topstitching on the bodice.

The feel and style of the dress lent itself to some double white topstitching on the bodice.

DSC_0161 The bodice is fully lined and all the seams are overlocked. The hand-sewn hem is 2″ wide.DSC_0165

LET’S BE HONEST:

1. The Butterick pattern is labeled Easy. In reality, it is easy for an experienced sewer. There are quite a few techniques that wouldn’t be easy if you were doing them for the first time such as facings, zipper, pleats, and princess seams. Overall there are no surprises or odd features to this pattern.

2. There’s no other way of saying it – I am small busted. The advantage for me of constructing my own garments is I can balance out my portions by custom fitting. With this pattern, I was going for more of a semi-fitted bodice, rather than a fitted one because I felt like a fitted bodice would emphasize the discrepancy in size between my top and bottom half, especially with a full skirt. This pattern had different bodice pattern pieces for A/B, C, and D cups. Of course I used the A/B pattern piece and still took it in at the bust after my first try-on. I took it in again at the side seams after my second try-on. I eventually achieved the fit I wanted.

3. I LOVE the pleats on the skirt. I was hesitant to make a dress with a full skirt because my extra inches through my mid-section. But these pleats lay completely flat with no extra poof where you don’t need it. I’m still staying away from gathers, but yes, I can do pleats!

4. I wanted my hemline to be between view A and C, so I added a few inches onto the skirt A length pattern piece before cutting out the fabric. I like my hem to hit right below the knee cap at the narrowist part of the leg above the calf. That’s where it most flattering because you’re showing off your curves rather than cutting your leg off at a wider part.

Overall, I love my Sunshine Jumper and plan on wearing it a whole lot this summer and spring. Thank you for taking the time to read this post. I welcome your comments. Lori

The Sandra Dress

Sewing others stylish is just as much fun as sewing myself stylish! That’s why I’m so excited to feature my beautiful friend, Sandra, as a guest model in this post. For Fresh Make #7, I have made a versatile shift dress.
DSC_0198
The pattern I used is Burda 7031. I purchased on sale at JoAnn’s for $2.49. A few months ago, I posted it to my Facebook page as a pattern that I thought would be flattering on all figure types. “Who would like to make it?”, I posed. And Sandra said, “I would!” Sandra’s machine and sewing skills were a bit rusty, so I offered to make the dress for her and feature it in my blog.
7031
Now here’s the super fun part about sewing for friends – the shopping trip to buy the fabric! We went to Mood on La Brea Avenue in Los Angeles and had a blast imagining ourselves as designers on Project Runway.

Sandra is captivated by all the luscious fabrics.

Sandra is captivated by all the luscious fabrics.


We spent at least 90 minutes wondering up and down the aisles, drooling and touching fabrics. Sandra finally choose this luxurious knit wool jersey. The pattern requires 2 5/8 yards. I think the fabric was $18 per yard. And did Sandra care? No, it was gorgeous!

Fabric bought, time for lunch! We walked up four blocks on La Brea to Sycamore Kitchen and both had salads were to die for. The Sycamore Kitchen is also directly across the street from recent Austrialian transplant, The Fabric Store. What a great day!

Here’s the results of our efforts:
DSC_0205DSC_0207DSC_0209

LET’S BE HONEST:
1. I when sew for others, the size I make is confidential, even to my client! I want having a garment custom made to be a wonderful, feel-good experience.

2. Sandra wanted the sleeve to become narrower towards the hem instead of the slight bell shaped of the pattern. I took about 4″ total off the bottom of the sleeve width.

3. I thought an interesting element to this otherwise very basic pattern was the bust dart. Sandra loved the shape that it created, too.

This dart may look unusual, but it creates a great shape.

This dart may look unusual, but it creates a great shape.

4. I found a big surprise as I began cutting and sorting through the pattern pieces. There was a dart at the top of the sleeve.

I don't think I've ever encountered a sleeve with a dart at the top before.

I don’t think I’ve ever encountered a sleeve with a dart at the top before.

I considered manipulating the pattern to remove the dart because I was concerned that the sleeve might be a bit pointy where the dart ended. But then I decided I would go with it. It was part of the design vision for this pattern. To my delight, the sleeve actually turned out beautiful. This amazing wool jersey fabric molds itself like cake fondant when a steam iron is gently used on it. The dart is not even noticable.

5. I added 2″ to the hem when cutting the fabric to be sure I had enough length to create a hem that hit slightly past the midpoint of the knee. This is a flattering spot for a hem as it accentuates the narrower part of your upper calf without showing your whole knee.
DSC_0206

Sandra and I were giddy with excitement when I brought her the finished dress. We were thrilled with the perfect, flattering fit. For Sandra, wearing it is as comfortable as a nightgown, and no shape wear required!

Thank you for taking the time to read this post. As always, I welcome your comments.

My Chill Pants

Sometimes when I am going out, I want to pull on something quickly, be super comfortable, and still feel like I’m wearing something unique and stylish. I decided to make a casual pair of wide-legged pants as an interesting alternative to jeans for Fresh Make #6.
DSC_0120
The pattern I choose was McCall’s 6514. I purchased this pattern for $1.40 as part of a 5 McCall’s patterns for $7.00 sale. I named this pattern My Chill Pants because these pants seem like a something you might pull on when you are going to just lounge around with friends. Or when you are going out to dinner and don’t want to feel constricted after a great meal.
M6514
I have to admit that I rarely shop for fabric at JoAnn’s. It is the only fabric store within miles of my house, and sometimes as a last resort I need buy fabric there. The fabric for this project was purchased at JoAnn’s because I was under a time constraint, and, I have to say I really like it! It is a light weight polyester knit with smooth feel and nice drape. I actually had these pants stuffed in a suitcase for 10 days, and when I unpacked them, they barely had a wrinkle. The fabric cost $10.49 on sale per yard. The pattern requires 2 3/8 yards.
DSC_0122DSC_0125

There is a front yolk.

There is a front yoke.


The back waist is elastic.

The back waist is elastic.


The front and back come together like this.

The front and back come together like this.


My favorite way to hem knits is with a double needle.

My favorite way to hem knits is with a double needle.

LET’S BE HONEST:

1. This pattern had no surprises for me!

2. This pattern is labeled EASY. I would say that a fairly accurate label, accept for the waist band features. Sewing the side seams together at the waist was a bit tricky, and the front yoke requires hand stitching on the inside facing.

3. The front yoke piece is the only area where fitting is crucial because it needs to hit exactly at the middle of the sides of your waist. I cut that piece exactly between the size 14 and 16, and it worked out perfectly. The legs are so full, it doesn’t really matter what size you cut!

4. The only alterations I made to the pattern pieces before cutting was I took 1 inch off the crotch length and 2 inches off the hem length. Since I’m not the tallest person in the world, I ended up cutting off a few more inches off the bottom of the legs when I hemmed the pants.

Overall I am very happy with my Chill Pants. They couldn’t possibly be more comfortable or easy to care for.

As always, I appreciate you taking the time read my post and welcome your comments. Happy sewing! Lori

The Festival Skirt

I’m going to wear lots of skirts this spring and summer. Enough of those jeans shorts. I’m adding a second skirt to my stylish handmade collection for Fresh Make #5.
DSC_0099
The pattern I choose was Simplicity 2416. I purchased this pattern at JoAnn’s Fabrics for $1.00 during their 5 Simplicity patterns for $5.00 sale. I like this pattern because it has a retro 70’s vibe and it seemed like it would be a fun, feel good skirt to wear. I named the pattern The Festival Skirt because I could imagine a groovy gal frolicking around in a swirl skirt like this a summer music festival.

I made view B.

I made view B.

I am in love with the fabrics I choose. They are from Amy Butler’s Hapi Voile collection, purchased from my favorite online fabric store, Hawthorne Threads. This cotton voile is amazing. It’s smooth and lightweight with a beautiful drape – a delight to sew with. The cost for this fabric, including shipping was $58.50 and worth every penny.
DSC_0102

DSC_0105
DSC_0109

There's a simple elastic casing at the waist.

There’s a simple elastic casing at the waist.

 

I overlocked all the edges together and did a rolled hem.

I overlocked all the edges together and did a rolled hem.


LET’S BE HONEST:
1. The pattern pieces, all seven, are just a series of swirls (or flounces as they are referred to in the directions), it is viturally impossible to measure the pattern pieces for fit before cutting out the fabric. So with my new updated knowledge about my measurements, I simply cut a size 16. Always error to the larger size – you can always trim off fabric, but you can’t add on. Right? It turns out it fit fine. I probably could have gotten away with a 14, but for me, there’s nothing worse than fabric pulling across the tummy.

2. 54″ vs. 6o” I ran across this same issue with The Instead Top. The pattern envelope gave yardage amounts for 45″ and 60″, but this Amy Butler fabric is 54″ wide. Again, I thought it would be fine to buy the specified amount for 60″, but I ended up having to do some “creative” manipulations of the patterns pieces to fit them all on the fabric. I would definitely buy at least an 1/8 of a yard more of each fabric if I were to repeat this project.

3. Interesting hem. The directions instruct you to hem the second to last flouce before sewing on the last flounce. (The hem is split between the two contrasting fabrics.) This resulted in curve that I’m not sure I care for.
DSC_0113
This flouce (the flower print one) also dipped more in one spot, creating a bit of an uneven hem. But, hey, maybe I shouldn’t let that bother me. The photo on the pattern envelope kind of looked that way too.

4. I did “raise” the skirt a bit. I anticipated that the skirt would probably be too long, but also knew it would be tedious and risky to mess with the swirl pattern pieces to shorten the length. After completing the hem but before doing the elastic casing, I tried it on and determined that I would cut off 2″ from the waist to shorten it. This adjustment was minor enough that it didn’t affect the fit or look of the skirt.

Overall, I am completely enamored with the skirt! And I highly recommend the Amy Butler cotton voiles if you choose to make a Festival skirt.

Again, whether you are a sewer or non-sewer, I sincerely appreciate you for taking the time to read this post. As always, I welcome your comments and feedback. Lori

The Instead Top

Several years ago I made a resolution not to buy any more plain T-shirts. My casual tops must either have a print or interesting design feature. I did this to keep myself from being too boring. These tops however must be as comfortable and easy to wear as a T-shirt. Fresh Make #5 falls into this category. You can never have too many cute grab-and-go tops.

DSC_0077

The Pattern I used is Butterick 5356 which I purchased at JoAnn’s for $1.40 as part of a 5 Butterick patterns for $7 sale. I have named the pattern The Instead Top because you can grab it instead of a T-shirt. What attracted me to this pattern was the loose fit and the peplum style sleeves on view D. I love a loose fitting top because it’s flattering and forgiving to whatever you got going on underneath!

I made view D.

I made view D.

I purchased the fabric at The Fabric Store on La Brea Avenue in Los Angeles. I was thrilled when I learned of the opening of this shop, a new location, and first in the U.S., for this Austrailian company. I didn’t know what to expect and was not disappointed to when I found a beautiful selection of high quality natural fiber textiles at reasonable prices. I bought 1 1/4 yard of cotton knit at $12 per yard for this project. The feel of this fabric is smooth and soft, very light weight and luxorous for a cotton knit.

DSC_0084
DSC_0086
DSC_0088

DSC_0091

DSC_0093

LET’S BE HONEST:

1. This pattern is labeled “FAST & EASY.” While the pattern does avoid a set-in sleeve, it is a “knits only” pattern, has gathers, and a curved seam. None of these features should be a deal breaker, but would be best done with some guidance for a beginning sewist who has yet to do these techniques.

2. I thought size wouldn’t matter too much – because it was a loose fitting top. I cut a medium (12-14), and I should have cut a small (8-10). I still have trouble wrapping my head around the fact that there is a large difference in numbers between my bottom and top half. I did not like how the sleeve hung on me after attaching the ruffle, so I decided to take it off, take in the seam in the underarm area about an inch, and then re-attach.

3. This fabric was 54″ instead of 60″. The patterns always give yardage amounts for 60″ and usually if the fabric is a bit narrower it doesn’t matter. In this case I was unable to fit the full length of the sleeve ruffle pattern piece on the fabric and had to settle for a ruffle that was less full. I would have liked the 3 or 4 inches I had to leave off the diameter of the ruffle.

4. Don’t cut yourself in half at your widest part. One of the beauties of making your own clothes in you can adjust them to flatter you the best way possible. I turned the hem up 4″ instead of the 1 1/4″ allowed on the pattern. My widest part is my thighs and my legs are relately short, so I like my tops to end somewhere around the upper part of my hips.

Overall I am happy with my Instead top. However, if I were to make it again, I think I would make a size Small.

Thank you so much for taking the time to read this post. As always, I welcome your feedback and comments. Lori